HSK-456 is a monochrome graphic LCD display module, which having 128×96 dots,  Built in with UC1617 controller IC or compatible controller. It supports 6800 8bit interface, 3.3V power supply and DC-DC convertor built in. The LED backlight default color is white, There are different LED backlights available in various colors including blue, green, yellow-green and red.

HSG-320240BV2 is a monochrome graphic LCD display module, which having 320×240 dots, Only drivers built in, 5.0V power supply and DC-DC convertor built in. The LED backlight default color is white, There are different LED backlights available in various colors including green, yellow-green and red.

HSG-128649 is a monochrome graphic LCD display module, which having 128×64 dots,  Built in with SBN0064G controller IC or compatible controller. It supports 6800 8-bit parallel interface, 5.0V power supply and DC-DC convertor built in. The LED backlight default color is yello-green, There are different LED backlights available in various colors including blue, green, white and red.

Appearance: colorless liquid. Boiling point: 110°C/20mmHg(lit.) Relative density (water = 1): 1.086±0.06 g/cm3 (Predicted) Assay: ≥98% Uses: It is a commonly used chemical raw material

Appearance: brown needle-like crystals. Melting point: 69-71°C (lit.) Boiling point: 272°C (lit.) Relative density (water = 1): 1,34 g/cm3 Solubility: slightly soluble in water, soluble in most organic solvents. Assay: ≥98% Uses: intermediates of herbicides in pesticides, as well as dye intermediates

Appearance: waxy yellow solid. Melting point: 39-41°C (lit.) Boiling point: 255-256°C (lit.) Relative density (water = 1): 1.48 g/cm3 (55°C) Assay: ≥99% Uses: It is an important intermediate of 3-chloro-4-fluoronitrobenzene, 3-chloro-4-fluoroaniline, 3,4-dichloroaniline and other organic chemical products

Appearance: transparent liquid Boiling point: 70-72°C 56mm Relative density (water = 1): 1.221 Assay: ≥98% Uses: for pharmaceutical intermediates.

Appearance: colorless transparent liquid Boiling point: 1.096 g/mL at 25 °C (lit.) Relative density (water = 1): 1.362±0.06 g/cm3 (Predicted) Assay: ≥98% Uses: for pharmaceutical intermediates.

Appearance: light yellow transparent liquid Boiling point: >90°C/2mm Relative density (water = 1): 1.362±0.06 g/cm3 (Predicted) Assay: ≥98% Uses: for pharmaceutical intermediates.

Appearance: colorless liquid Boiling point: 144.5±20.0 °C (Predicted) Relative density (water = 1): 1.24 Assay: ≥98% Uses: for pharmaceutical intermediates.

Appearance: colorless solid Melting point: 75 °C Boiling point: 268.1±35.0 °C (Predicted) Relative density (water = 1): 1.596±0.06 g/cm3 (Predicted) Assay: ≥98% Uses: for intermediates of the insecticide fluorobenzuron.

Appearance: colorless transparent liquid Boiling point: 65-66°C 10mm Relative density (water = 1): 1.58g/mLat 25°C (lit.) Solubility: Reacts with water Assay: ≥98% Uses: for the production of levofloxacin

Appearance: white crystal Melting point: 94-96 °C (lit.) Boiling point: 241.9±35.0 °C (Predicted) Relative density (water = 1): 1.4362 (estimate) Assay: ≥98% Uses: used as pharmaceutical intermediates, also used in the preparation of liquid crystal materials for aviation and aerospace

Appearance: white powder Melting point: 152-155 °C Boiling point: 718.441°C at 760 mmHg Relative density (water = 1): 1.282g/cm3 Assay: ≥98% Uses: used as ebesartan, olmesartan cilexetil intermediate.

Appearance: white powder Melting Point: 188-190 °C (lit.) Boiling point: 239.5±20.0 °C (Predicted) Relative density (water = 1): 1.3486 (estimate) Solubility: soluble in water Assay: ≥98% Uses: used as pharmaceutical and liquid crystal intermediates.

Appearance: white or light yellow crystal Melting point: 33-36 °C Boiling point: 167°C (lit.) Relative density (water = 1): 1.425g/mLat 25°C (lit.) Assay: ≥98% Uses: Used as pharmaceutical intermediates, it is the main intermediate of the third generation of broad-spectrum high-efficiency quinolone antibacterial agents ciprofloxacin and anthrofloxacin